Автозапчасти » BUICK » 2011 » LUCERNE » 3.9L V6 » Подвеска » Регулировочный болт / пластина развала схождения

Alignment Bolt / Camber Plate
Front; with 16 mm Bolts; Single Offset Adjuster; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change

Alignment Bolt / Camber Plate
Front; with 16 (mm) Bolts; Replacing All Bolts Will Increase Camber Adjustment Range to Plus or Minus 2-1/2 Degrees; Double Offset

Alignment Bolt / Camber Plate
Front Lower Strut Mount; 16 mm Bolt; Adjusts Camber -1.75 Degrees to +1.75 Degrees; Single Offset

Alignment Bolt / Camber Plate
Front Lower Strut Mount; Adjusts Camber -1.25 Degrees to +1.25 Degrees

Alignment Bolt / Camber Plate
Front Lower Strut Mount; Adjusts Camber -1.75 Degrees to +1.75 Degrees; Single Offset; 16 mm Bolt

Alignment Bolt / Camber Plate
Front Lower Strut Mount; Adjusts Camber -1.25 Degrees to +1.25 Degrees

Alignment Bolt / Camber Plate
Front; Axis Cam Design - For use on vehicles with or without elongated strut flange holes; For Replacement of 16mm Bolts; Camber Plus or Minus 1.75 Degrees

Alignment Bolt / Camber Plate
Front Lower Strut; 16mm Bolt; Camber Plus or Minus 1.75 Degrees

Alignment Bolt / Camber Plate
Front; with 16 (mm) Bolts; Double Offset

Alignment Bolt / Camber Plate
Front; Single Offset Adjuster; with 16 (mm) Bolts; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Adapter Plate Not Included

Alignment Bolt / Camber Plate
Front; Single Offset Adjuster; with 16 (mm) Bolts; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change

Alignment Bolt / Camber Plate
Front; Single Offset Adjuster; with 16 (mm) Bolts; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Adapter Plate Not Included

Alignment Bolt / Camber Plate
Front; 16mm Bolts; Double Offset; Replacing All Bolts Will Increase Camber Adjustment Range To Plus Or Minus 2.5 Degrees; Provides Alignment For Non-Adjustable Vehicles; Minus 1-3/4 To Plus 1-3/4 Degree

Alignment Bolt / Camber Plate
Front; Single Offset Adjuster; with 16 (mm) Bolts; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Adapter Plate Not Included

Alignment Bolt / Camber Plate
Front; Caster/Camber Adjusting Kit; 16MM BOLTS; DOUBLE OFFSET; FROM MINUS 1-3/4 TO PLUS 1-3/4 DEGREES OF CHANGE

Alignment Bolt / Camber Plate
Front; +/- 1-3/4 Degrees; 16mm Bolt

Alignment Bolt / Camber Plate
MAGNA CAM; 16MM w/SLOTTED WASHERS

Alignment Bolt / Camber Plate
Front; with 16 (mm) Bolts; Double Offset

Alignment Bolt / Camber Plate
Front; Single Offset Adjuster; with 16 (mm) Bolts; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Kit Contains ADAPTER PLATE

Alignment Shim
Camber/Toe Adjusting Kit; DUAL ANGLE SHIM (RED); CAMBER: -1.50 DEGREES TO +1.50 DEGREES; CHECK FOR CALIPER TO ROTOR CLEARANCE w/DISC BRAKES, USE SPACER TO KEEP CALIPER CENTERED ON ROTOR