Автозапчасти » BUICK » 2018 » LACROSSE » 3.6L V6 » Подвеска » Регулировочный болт / пластина развала схождения

Alignment Bolt / Camber Plate
Front; without Performance Suspension; with 12 mm Bolts; Single Offset Adjuster; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change

Alignment Bolt / Camber Plate
Front; without Performance Suspension; with 12 (mm) Bolts; Replacing All Bolts Will Increase Camber Adjustment Range to Plus or Minus 2-1/2 Degrees; Plus or Minus 1-3/4 Degrees of Change; Double Offset

Alignment Bolt / Camber Plate
Rear; Camber Plus or Minus 2 Degrees

Alignment Bolt / Camber Plate
Front; Camber Plus or Minus 1.75 Degrees

Alignment Bolt / Camber Plate
Rear; Toe Adjustment Plus or Minus 2 Degree(s)

Alignment Bolt / Camber Plate
Front Lower Strut Mount; Adjusts Camber -1.25 Degrees to +1.25 Degrees

Control Arm Washer
Rear Lower; Rear Axle Chassis Equipment (GNQ)

Alignment Bolt / Camber Plate
Fits Avenir; Premium; HEX W/SPECIAL WASHER, M12X1.75X70, 45 THD,30 OD, 10.9,GMW3359or FWD; Essence; Preferred; HEX W/SPECIAL WASHER, M12X1.75X70, 45 THD,30 OD, 10.9,GMW3359

Alignment Bolt / Camber Plate
Front; Double Offset; For Replacement of 12mm Bolts; Camber Plus or Minus 1.75 Degrees; without High performance struts

Alignment Bolt / Camber Plate
Front; Single Offset; For Replacement of 12mm Bolts; Camber Plus or Minus 1.75 Degrees; without High performance struts

Alignment Bolt / Camber Plate
Front; Single Offset; For Replacement of 12mm Bolts; Camber Plus or Minus 1.75 Degrees; without High performance struts

Alignment Bolt / Camber Plate
Rear; FWD; Toe Adjustment Plus or Minus 2.00 Degree(s); without Performance Suspension

Alignment Bolt / Camber Plate
Front; without Performance Suspension; From Minus 1.75 to Plus 1.75 Degrees of Change; with 12 (mm) Bolts; Double Offset

Alignment Bolt / Camber Plate
Front; without Performance Suspension; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Single Offset Adjuster; with 12 (mm) Bolts

Alignment Bolt / Camber Plate
Front; with Performance Suspension; Camber Plus or Minus 2 Degrees

Alignment Bolt / Camber Plate
Rear; without Performance Suspension; Plus or Minus 2 Degree(s); with 10mm Bolts; Double Offset

Alignment Bolt / Camber Plate
Front; 12mm Bolts; Replacing All Bolts Will Increase Camber Adjustment Range To Plus Or Minus 2.5 Degrees; Minus 1-3/4 To Plus 1-3/4 Degree; Except Performance Suspension; Double Offset

Alignment Bolt / Camber Plate
Front; 12mm Bolts; Minus 1-3/4 To Plus 1-3/4 Degree; Single Offset; Except Performance Suspension

Alignment Bolt / Camber Plate
Front; without Performance Suspension; From Minus 1.75 to Plus 1.75 Degrees of Change; with 12 (mm) Bolts; Double Offset

Alignment Bolt / Camber Plate
Front; without Performance Suspension; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Single Offset Adjuster; with 12 (mm) Bolts