Автозапчасти » FORD » 2009 » MUSTANG » 4.0L V6 » Подвеска » Регулировочный болт / пластина развала схождения

Alignment Bolt / Camber Plate
Front; with 14 mm Bolts; Single Offset Adjuster; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change

Alignment Bolt / Camber Plate
Front; Plus or Minus 1.75 Degree(s)

Alignment Bolt / Camber Plate
Front Lower Strut Mount; 14 mm Bolt; Adjusts Camber -1.75 Degrees to +1.75 Degrees; Single Offset

Alignment Bolt / Camber Plate
Front Lower Strut Mount; 16 mm Bolt; Adjusts Camber -1.75 Degrees to +1.75 Degrees; Single Offset

Alignment Bolt / Camber Plate
Front Lower Strut Mount; Adjusts Camber -1.75 Degrees to +1.75 Degrees; 14 mm Bolt; Single Offset

Alignment Bolt / Camber Plate
Front; Single Offset; For Replacement of 14mm Bolts; Camber Plus or Minus 1.75 Degrees

Alignment Bolt / Camber Plate
Front; Plus or Minus 0.50 Degree(s) Caster

Alignment Bolt / Camber Plate
Front; Includes cam bolts (2) & castor bolts (2); Plus or Minus 1.50 Degree Camber - Plus or Minus 0.50 Degree of Caster

Alignment Bolt / Camber Plate
Front; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Single Offset Adjuster; with 14mm Bolts

Alignment Bolt / Camber Plate
Front; Camber / Caster Plus or Minus 2 Degrees; Modification Of The Strut Tower Opening Will Be Necessary To Gain Access To Adjusting Bolts

Alignment Bolt / Camber Plate
Front; 14mm Bolts; Minus 1-3/4 To Plus 1-3/4 Degree; Single Offset

Alignment Bolt / Camber Plate
CONTAINS 1 CASTER BOLT; PLUS OR MINUS .5 DEGREE(S) CASTER; ELONGATION OF THE PREMARKED FACTORY HOLES MAY BE REQUIRED

Alignment Bolt / Camber Plate
Front; Plus or Minus .5 Degree(s) Caster; Elongation of the Pre-Marked Factory Holes May Be Required; Contains 1 Caster Bolt

Alignment Bolt / Camber Plate
Front; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change; Single Offset Adjuster; with 14 (mm) Bolts

Alignment Bolt / Camber Plate
Front; Caster/Camber Adjusting Kit; SINGLE OFFSET ADJUSTER; 14MM BOLTS; FROM MINUS 1-3/4 TO PLUS 1-3/4 DEGREES OF CHANGE