Автозапчасти » JEEP » 2008 » LIBERTY » 3.7L V6 » КПП / Редуктора / Привода » Карданный вал
Drive Shaft
Rear; Steel Conversion Shaft; w/Sales Code DH2 (Selec-Trac II Active Full Time 4WD)
Rear; Steel Conversion Shaft; w/Sales Code DH2 (Selec-Trac II Active Full Time 4WD)
Drive Shaft
Front; Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft; with 15-1/2" Long Driveshaft
Front; Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft; with 15-1/2" Long Driveshaft
Drive Shaft
Front; Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft; with 15-1/2" Long Driveshaft
Front; Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft; with 15-1/2" Long Driveshaft
Drive Shaft
Rear; AWD; Automatic trans.; w/Sales Code DHL (Command Trac II - Part Time 4WD)
Rear; AWD; Automatic trans.; w/Sales Code DHL (Command Trac II - Part Time 4WD)
Drive Shaft
Rear; w/AUTO TRANS and 4WD/AWD; w/SALES CODE DHL (COMMAND-TRAC II PART TIME 4WD)
Rear; w/AUTO TRANS and 4WD/AWD; w/SALES CODE DHL (COMMAND-TRAC II PART TIME 4WD)
Drive Shaft
Front; Tube length of 19-1/4 in. from weld to weld, with NV140 transfer case
Front; Tube length of 19-1/4 in. from weld to weld, with NV140 transfer case
