Автозапчасти » MITSUBISHI » 1997 » ECLIPSE » 2.4L L4 » Подвеска » Болт регулировки подвески

Alignment Bolt / Camber Plate
Rear; Adjustment Range: Camber -0.75 to +1.50

Alignment Bolt / Camber Plate
Rear; Spacers Not Included; Contains Bracket; 1-1/2 Degree Maximum Camber Plus And 3/4 Degree Maximum Camber Minus

Rear; Contains Spacer; Up To Minus 1 Degree To Plus 3 Degree

Alignment Bolt / Camber Plate
Rear Suspension

Alignment Bolt / Camber Plate
Rear Upper; Contains 8 Shims And 4 Bolts; 1/16" Thick Shim Equals .20 Degree Possible Change; 1/8" Thick Shim Equals .40 Degree Possible Change; Plus or Minus 1-1/4 Degree; 1-1/4 Degree

Alignment Bolt / Camber Plate
Rear; 12mm Bolts; Single Offset; Minus 1-3/4 To Plus 1-3/4 Degree

Alignment Cam / Plate
Rear; Spacers Not Included; Camber Plus or Minus 1 Degrees

Alignment Cam / Plate
Rear; Includes Spacer; Up to Minus 1 Degree(s) to Plus 3 Degree(s)

Alignment Bolt
with Polyurethane Bushings; Minus 3/4 Degree To Plus 1 Degree Camber

Alignment Bolt / Camber Plate
Up to 1/2 Degree Positive(+) Camber

Alignment Bolt
From1-3/4 to 3-1/4Degree Positive(+) Camber

Alignment Caster / Camber Cam Bolt Kit
Rear Upper; 1/16 in Thick Shim Equals .20 Degree Possible Change; 1/8 in Thick Shim Equals .40 Degree Possible Change; Plus or Minus 1-1/4 Degree(s)

Alignment Bolt / Camber Plate
Rear; w/ 12 mm Bolts; Single Offset Adjuster; From Minus 1-3/4 to Plus 1-3/4 Degrees of Change

Front; Allows Adjustment Range From -3/4 degrees to +1 degrees

Alignment Bolt / Camber Plate
Rear; Allows Adjustment Range From +1 to -1 degrees

Alignment Caster / Camber Cam Bolt Kit
Contains 2 Adjustable Bolts

Alignment Bolt / Camber Plate
Rear; 12mm Bolts; Single Offset; Minus 1-3/4 To Plus 1-3/4 Degree

Alignment Bolt / Camber Plate
Rear; 12MM BOLTS; MINUS 1-3/4 TO PLUS 1-3/4 DEGREE; SINGLE OFFSET

Alignment Bolt / Camber Plate
FitsCamber/Toe Adjusting Kit; REAR LOWER STRUT; 12MM BOLTS; MAGNA CAM/BOLT KIT, +/- 1-3/4 DEG; SLOTTED ONLYOrCamber/Toe Adjusting Kit; REAR LOWER STRUT; DOUBLE OFFSET; MINUS 1-3/4 TO PLUS 1-3/4 DEG; REPLACING ALL BOLTS WILL INCREASE CAMBER ADJRANGE TO +/- 2.5 DEG; w/ 12MM BOLTS