Автозапчасти » PONTIAC » 2004 » VIBE » 1.8L L4 » Подвеска » Шайба регулировочная подвески

Alignment Shim
Rear; FWD; M10 x 1.25 x 30 mm Hub Bolts Should Be Used When Installing Rear Wheel Shim; Internal Cut To Fit Tabs; Full Contact Dual Angle Shim; Check Caliper To Rotor Clearance After Installation

Alignment Shim
Rear; FWD; Up to Plus or Minus 1/4 Degree Camber / Toe; Full Contact Dual Angle Shim; Cut-To-Fit; Black Shim

Alignment Shim
Rear; FWD; Up to Plus or Minus 1/2 Degree Camber / Toe; Full Contact Dual Angle Shim; Cut-To-Fit; Black Shim

Alignment Shim
Rear; FWD; Up to Plus or Minus 3/4 Degree Camber / Toe; Full Contact Dual Angle Shim; Cut-To-Fit; Black Shim

Alignment Shim
Rear; FWD; Up to Plus or Minus 1 Degree Camber / Toe; Full Contact Dual Angle Shim; Cut-To-Fit; Black Shim

Alignment Shim
Rear; FWD; Adjusts Camber and Toe -1.50 Degrees to +1.50 Degrees

Alignment Shim
Rear; FWD; Adjusts Camber and Toe -1.50 Degrees to +1.50 Degrees

Alignment Shim
Rear; Yellow Full Contact Dual Angle Shim; Plus or Minus 1.5 Degree(s) Camber, Plus or Minus 1.5 Degree(s) Toe

Alignment Shim
Rear; FWD; M10 x 1.25 x 30 (mm) Hub Bolts Should be Used When Installing Rear Wheel Shim; Full Contact Dual Angle Shim; Use w/ Caliper Shim Spacers If Necessary; Internal Cut To Fit Tabs; Check Caliper To Rotor Clearance After Installation

Alignment Shim
1.60 (mm) / 1/16 (in) Thickness; 1/2 (in) Bolt Opening; Fender Shims; 1-5/8 (in) Width

Alignment Shim
Rear; FWD; Full Contact Dual Angle Shim; Up to Plus/Minus 1/4 Degree Camber & Plus/Minus 1/4 Degree Toe; Cut To Fit

Alignment Shim
Rear; FWD; Full Contact Dual Angle Shim; Up to Plus/Minus 1/2 Degree Camber & Plus/Minus 1/2 Degree Toe; Cut To Fit

Alignment Shim
Rear; FWD; Full Contact Dual Angle Shim; Up to Plus/Minus 3/4 Degree Camber & Plus/Minus 3/4 Degree Toe; Cut To Fit

Alignment Shim
Rear; FWD; Full Contact Dual Angle Shim; Up to Plus/Minus 1 Degree Camber & Plus/Minus 1 Degree Toe; Cut To Fit

Alignment Shim
Rear; FULL CONTACT DUAL ANGLE SHIM; CUT TO FIT; UP TO PLUS/MINUS 1/2 DEGREE CAMBER & PLUS/MINUS 1/2 DEGREE TOE; BLACK; FWD

Alignment Shim
with 1-5/8 in Width; 1/2 in Bolt Opening; 1/8 in Thickness; Universal

Alignment Shim
Rear; FWD; Black; Cut To Fit; Plus or Minus 1/2 Degree Camber / Toe

Alignment Shim
Rear; Full Contact Dual Angle Shim; Adjustment Range: Camber/Toe 1.50

Alignment Shim
Rear; FWD; Black; Cut To Fit; Plus or Minus 1/4 Degree Camber / Toe

Alignment Shim
FitsDUAL ANGLE SHIM (YELLOW); REAR; CAMBER: -1.50 DEGREES TO +1.50 DEGREES; 75600 MUST BE USED w/ 73415; CAUTION: CHECK FOR CALIPER TO ROTOR CLEARANCE w/DISC BRAKES, USE SPACER SET 75970 TO KEEP CALIPER CENTERED ON ROTOR; 2WDorREAR; CAMBER: -1.50 DEGREES TO +1.50 DEGREES; DUAL ANGLE SHIM (YELLOW); 75600 MUST BE USED WITH 73415; CAUTION: CHECK FOR CALIPER TO ROTOR CLEARANCE W/DISC BRAKES, USE SPACER SET 75970 TO KEEP CALIPER CENTERED ON ROTOR; 2WD

Alignment Shim
2WD; Rear; Cut To Fit; +/- 1/4 Degree Camber/Toe