Автозапчасти » BUICK » 1996 » RIVIERA » 3.8L V6 Supercharged » Подвеска » Шайба регулировочная подвески

Alignment Shim
Rear; Internal Cut To Fit Tabs; Full Contact Dual Angle Shim; Check Caliper To Rotor Clearance After Installation

Alignment Shim
Rear; Adjusts Camber and Toe -1.50 Degrees to +1.50 Degrees

Alignment Shim
Rear; Adjusts Camber and Toe -1.50 Degrees to +1.50 Degrees

Alignment Shim
Rear; Red; Plus or Minus 1.5 Degree(s) Camber, Plus or Minus 1.5 Degree(s) Toe

Alignment Shim
Rear; Yellow Full Contact Dual Angle Shim; Plus or Minus 1.5 Degree(s) Camber, Plus or Minus 1.5 Degree(s) Toe

Alignment Shim
Rear; Full Contact Dual Angle Shim; Use w/ Caliper Shim Spacers If Necessary; Internal Cut To Fit Tabs; Check Caliper To Rotor Clearance After Installation

Alignment Shim
1.60 (mm) / 1/16 (in) Thickness; 1/2 (in) Bolt Opening; Fender Shims; 1-5/8 (in) Width

Alignment Shim
Use w/ Full Contact Dual Angle Shims to align the Caliper to the Disc Brake Rotor on some FWD Vehicles w/ Hub Mounted Rear Disc Brakes

Alignment Shim
Rear; Up to Plus/Minus 1-1/2 Degree Camber & Plus/Minus 1-1/2 Degree Toe; Red Shim; Internal Cut To Fit Tabs; Full Contact Dual Angle Shim; Check Caliper To Rotor Clearance After Installation

Alignment Shim
with 1-5/8 in Width; 1/2 in Bolt Opening; 1/8 in Thickness; Universal

Alignment Shim
Rear; Full Contact Dual Angle Shim; Up to Plus/Minus 1-1/2 Degree Camber & Plus/Minus 1-1/2 Degree Toe; Red Shim; Internal Cut To Fit Tabs; Check Caliper To Rotor Clearance After Installation

Alignment Shim
FitsFront; 1-5/8" Width; 1/2" Bolt Opening; 1/8" Thickness; Fender ShimsorRear; 1-5/8" Width; 1/2" Bolt Opening; 1/8" Thickness; Fender Shims

Alignment Shim
FitsDUAL ANGLE SHIM (YELLOW); REAR; CAMBER: -1.50 DEGREES TO +1.50 DEGREES; CAUTION: CHECK FOR CALIPER TO ROTOR CLEARANCE w/DISC BRAKES, USE SPACER SET 75970 TO KEEP CALIPER CENTERED ON ROTORorREAR; CAMBER: -1.50 DEGREES TO +1.50 DEGREES; DUAL ANGLE SHIM (YELLOW); CAUTION: CHECK FOR CALIPER TO ROTOR CLEARANCE W/DISC BRAKES, USE SPACER SET 75970 TO KEEP CALIPER CENTERED ON ROTOR

Alignment Shim
Fits DUAL ANGLE SHIM (RED); REAR; CAMBER: -1.50 DEGREES TO +1.50 DEGREES; CAUTION: CHECK FOR CALIPER TO ROTOR CLEARANCE w/DISC BRAKES, USE SPACER SET 75970 TO KEEP CALIPER CENTERED ON ROTORor REAR; REAR CAMBER; REAR TOE; CAMBER/TOE: PLUS OR MINUS 1.50 DEGREES (RED); CAUTION: CHECK FOR CALIPER TO ROTOR CLEARANCE W/DISC BRAKES, SPACER MAY BE REQUIRED