Автозапчасти » JEEP » 1991 » COMANCHE » 2.5L L4 » КПП / Редуктора / Привода » Карданный вал
Drive Shaft
Front; 5 speed trans.; Aisin trans.; with 30.67 (in) Long Driveshaft; with 231 Transfer Case; with Dana Model 30 Axle
Front; 5 speed trans.; Aisin trans.; with 30.67 (in) Long Driveshaft; with 231 Transfer Case; with Dana Model 30 Axle
Drive Shaft
Front; 4WD; Automatic trans.; with 27.99 (in) Long Driveshaft; with 231 Transfer Case; with Dana Model 30 Axle
Front; 4WD; Automatic trans.; with 27.99 (in) Long Driveshaft; with 231 Transfer Case; with Dana Model 30 Axle
Drive Shaft
Front; Manual transmission; 5 speed trans.; Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; with Dana Model 30 Axle; with 231 Transfer Case; with 25-5/16" Long Driveshaft; Aisin trans.
Front; Manual transmission; 5 speed trans.; Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; with Dana Model 30 Axle; with 231 Transfer Case; with 25-5/16" Long Driveshaft; Aisin trans.
Drive Shaft
Front; Manual trans.; Compressed Length of 25-3/4 in. measured from center to center of the furthest U-Joints
Front; Manual trans.; Compressed Length of 25-3/4 in. measured from center to center of the furthest U-Joints
