Автозапчасти » TOYOTA » 2011 » COROLLA » 1.8L L4 » Подвеска » Шайба регулировочная подвески

Alignment Shim
Rear; Full Contact Dual Angle Shim; Internal Cut To Fit Tabs; Check Caliper To Rotor Clearance After Installation; Plus Or Minus 1-1/2 Degree Camber/Toe

Alignment Shim
Rear; Full Contact Dual Angle Shim; Cut To Fit; Plus Or Minus 1/4 Degree Camber/Toe

Alignment Shim
Rear; Full Contact Dual Angle Shim; Cut To Fit; Plus Or Minus 1/2 Degree Camber/Toe

Alignment Shim
Rear; Full Contact Dual Angle Shim; Cut To Fit; Plus Or Minus 3/4 Degree Camber/Toe

Alignment Shim
Rear; Full Contact Dual Angle Shim; Cut To Fit; Plus Or Minus 1 Degree Camber/Toe

Alignment Shim
Rear; Yellow Full Contact Dual Angle Shim; Check for caliper to rotor clearance w/disc brakes, Use spacer set MS50042 to keep caliper centered on rotor.; Plus or Minus 1.5 Degree(s) Camber, Plus or Minus 1.5 Degree(s) Toe

Alignment Shim
Rear; Full Contact Dual Angle Shim; Up to Plus/Minus 1-1/2 Degree Camber & Plus/Minus 1-1/2 Degree Toe; Internal Cut To Fit Tabs; Check Caliper To Rotor Clearance After Installation; ALIGNMENT FOR NON-ADJUSTABLE VEHICLES

Alignment Shim
Rear; Full Contact Dual Angle Shim; Up to Plus/Minus 1/4 Degree Camber & Plus/Minus 1/4 Degree Toe; Cut To Fit

Alignment Shim
Rear; Full Contact Dual Angle Shim; Up to Plus/Minus 1/2 Degree Camber & Plus/Minus 1/2 Degree Toe; Cut To Fit

Alignment Shim
Rear; Full Contact Dual Angle Shim; Up to Plus/Minus 3/4 Degree Camber & Plus/Minus 3/4 Degree Toe; Cut To Fit

Alignment Shim
Rear; Full Contact Dual Angle Shim; Up to Plus/Minus 1 Degree Camber & Plus/Minus 1 Degree Toe; Cut To Fit

Alignment Shim
Rear; Black; Cut To Fit; Plus or Minus 1/4 Degree Camber / Toe

Alignment Shim
FitsREAR; CAMBER: -1.50 DEGREES TO +1.50 DEGREES; EZ SHIM FULL CONTACT DUAL; CHECK FOR CALIPER TO ROTOR CLEARANCE w/DISC BRAKES. USE SPACER SET TO KEEP CALIPER CENTERED ON ROTORorREAR; CAMBER: -1.50 DEGREES TO +1.50 DEGREES; CHECK FOR CALIPER TO ROTOR CLEARANCE WITH DISC BRAKES. USE SPACER SET TO KEEP CALIPER CENTERED ON ROTOR; EZ SHIM FULL CONTACT DUAL

Alignment Shim
KIT; SPACER TO KEEP CALIPER CENTERED ON ROTOR; Front; SHIM SPACER SET (8)

Alignment Shim
Rear; +/- 1/4 Degree CAMBER/TOE

Alignment Shim
Rear; +/- 1/2 Degree CAMBER/TOE