Карданный вал для Ford Explorer 2000 года выпуска, модификация (4.0L V6 SOHC)

Drive Shaft
Front; 4WD; w/ 29.37 (In) Long Driveshaft; Measurement taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft

Drive Shaft
Rear; RWD; 2 door; Automatic trans.

Drive Shaft
Front; 4WD or AWD; 4 door

Drive Shaft
Rear; RWD; 4 door; Automatic trans.; 112.0" Wheelbase

Drive Shaft
Rear; 4WD; 2 door

Drive Shaft
Rear; RWD; 2 door; Manual trans.

Drive Shaft
Rear; 4WD or AWD; 4 door; 112.0" Wheelbase

Drive Shaft
Rear; RWD; 4 door; Manual trans.

Drive Shaft
Front; 4WD or AWD; 4 door; w/o Hardware

Drive Shaft
Front; 4WD; 30.56 Inches / 776 mm Compressed

Drive Shaft
Front; 4WD or AWD; 4 door; w/ 30.75 In. Prop Shaft

Drive Shaft
Front; 4WD or AWD; 4 door

Drive Shaft
Front; 6 Bolt CV Head; 91mm bolt pattern; 1310 Exposed U-Joint; Compressed length measures 29-5/8 in. from flange to the center of the U-Joint.

Drive Shaft
Front; AWD; Tube length of 23 in. measured from weld to weld; 28.6 in. Measured Flange to Center of U-Joint Collapsed; 6 bolt cup style front output flange; 1310 U-Joint Exposed on Opposite end Replaces; F77A-4A376CB, XL24-4A376BB, 65-9294

Drive Shaft
Front; Compressed length measures 29-5/8 in. from flange to the center of the U-Joint; 6 bolt CV Head; Exposed 1310 U-Joint on opposite end (1.063 in. Caps x 3.219 in. Span); Replaces OE Tube Length of 24-1/4 in. Weld to Weld