| DELPHI TC1703 Specifications |
|---|
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Gray |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Dust Boot | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Greasable | Yes |
| Grease Fitting Included | Yes |
| Height (IN) | 3.937 |
| Height (MM) | 100.0 |
| Length (MM) | 54 |
| Material | Steel |
| Maximum Outside Diameter (IN) | 2.126 |
| Maximum Outside Diameter (MM) | 54.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter (IN) | 1.024 |
| Mounting Bolt Head Diameter (MM) | 26.0 |
| Mounting Bolt Length (IN) | 2.815 |
| Mounting Bolt Length (MM) | 71.5 |
| Mounting Bolt Shank Diameter (IN) | 0.472 |
| Mounting Bolt Shank Diameter (MM) | 12.0 |
| Mounting Bolt Thread Diameter (MM) | 12.0 |
| Mounting Bolt Thread Length (IN) | 1.26 |
| Mounting Bolt Thread Length (MM) | 32.0 |
| Mounting Bolt Thread Pitch (MM) | 1.75 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Nuts Included | Yes |
| Position(s) | Front Lower |
| Stud Tapered End 1 Diameter (in) | 0.72 |
| Stud Tapered End 1 Diameter (mm) | 18.3 |
| Stud Tapered End 2 Diameter (in) | 0.827 |
| Stud Tapered End 2 Diameter (mm) | 21.0 |
| Stud Thread Diameter (IN) | 0.625 |
| Stud Thread Diameter (MM) | 15.8 |
| Stud Thread Length (IN) | 0.807 |
| Stud Thread Length (MM) | 20.5 |
| Stud Thread Pitch (mm) | 0.7 |
| Stud Threads Per Inch | 18 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width (MM) | 54.0 |
| Wrench Size (IN) | 0.669 |
| Wrench Size (mm) | 17.0 |
