| DELPHI TC1848 Specifications |
|---|
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | No |
| Color | Black |
| Cotter Pin Hole | No |
| Cotter Pin Included | No |
| Distance Between Mounting Holes (MM) | 84.0 |
| Dust Boot | Yes |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Grease Fitting Included | No |
| Height (IN) | 3.858 |
| Height (MM) | 98.0 |
| Length (MM) | 110 |
| Material | Steel |
| Maximum Outside Diameter (IN) | 1.929 |
| Maximum Outside Diameter (MM) | 49.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter (IN) | 1.047 |
| Mounting Bolt Head Diameter (MM) | 26.6 |
| Mounting Bolt Length (IN) | 1.26 |
| Mounting Bolt Length (MM) | 32.0 |
| Mounting Bolt Shank Diameter (IN) | 0.472 |
| Mounting Bolt Shank Diameter (MM) | 12.0 |
| Mounting Bolt Thread Diameter (MM) | 12.0 |
| Mounting Bolt Thread Length (IN) | 0.787 |
| Mounting Bolt Thread Length (MM) | 20.0 |
| Mounting Bolt Thread Pitch (MM) | 1.25 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Position(s) | Front Lower |
| Stud Tapered End 1 Diameter (in) | 0.809 |
| Stud Tapered End 1 Diameter (mm) | 20.55 |
| Stud Tapered End 2 Diameter (in) | 0.957 |
| Stud Tapered End 2 Diameter (mm) | 24.3 |
| Stud Thread Diameter (IN) | 0.63 |
| Stud Thread Diameter (MM) | 16.0 |
| Stud Thread Length (IN) | 1.051 |
| Stud Thread Length (MM) | 26.7 |
| Stud Thread Pitch (mm) | 1.5 |
| Stud Type | Threaded |
| Suspension Grade Type | Standard |
| Tapered Stud | Yes |
| Washers Included | No |
| Width (MM) | 87.0 |
| Wrench Size (IN) | 0.63 |
| Wrench Size (mm) | 16.0 |
