| DELPHI TC1865 Specifications |
|---|
| Adjustable | No |
| Ball Joint Assembly | Yes |
| Bushings Included | No |
| Castle Nut Included | Yes |
| Color | Black |
| Cotter Pin Hole | Yes |
| Cotter Pin Included | Yes |
| Distance Between Mounting Holes (MM) | 60.0 |
| Dust Boot | No |
| Dust Boot Material | Choloroprene Rubber (CR) |
| Greasable | Yes |
| Grease Fitting Included | No |
| Height (IN) | 3.618 |
| Height (MM) | 91.9 |
| Length (MM) | 117 |
| Material | Steel |
| Maximum Outside Diameter (IN) | 1.772 |
| Maximum Outside Diameter (MM) | 45.0 |
| Mount Plate Included | No |
| Mounting Bolt Head Diameter (IN) | 0.866 |
| Mounting Bolt Head Diameter (MM) | 22.0 |
| Mounting Bolt Length (IN) | 1.094 |
| Mounting Bolt Length (MM) | 27.8 |
| Mounting Bolt Shank Diameter (IN) | 0.472 |
| Mounting Bolt Shank Diameter (MM) | 12.0 |
| Mounting Bolt Thread Diameter (MM) | 12.0 |
| Mounting Bolt Thread Length (IN) | 0.787 |
| Mounting Bolt Thread Length (MM) | 20.0 |
| Mounting Bolt Thread Pitch (MM) | 1.25 |
| Mounting Bolts Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting Hole Quantity | 3 |
| Mounting Type | Bolt On |
| Nuts Included | Yes |
| Position(s) | Front Upper |
| Stud Tapered End 1 Diameter (in) | 0.689 |
| Stud Tapered End 1 Diameter (mm) | 17.5 |
| Stud Tapered End 2 Diameter (in) | 0.827 |
| Stud Tapered End 2 Diameter (mm) | 21.0 |
| Stud Thread Diameter (IN) | 0.551 |
| Stud Thread Diameter (MM) | 14.0 |
| Stud Thread Length (IN) | 0.736 |
| Stud Thread Length (MM) | 18.7 |
| Stud Thread Pitch (mm) | 1.5 |
| Stud Type | Threaded |
| Tapered Stud | Yes |
| Washers Included | No |
| Width (MM) | 89.0 |
| Wrench Size (IN) | 0.748 |
| Wrench Size (mm) | 19.0 |
