DELPHI TC2627 Specifications |
---|
Adjustable | No |
Ball Joint Assembly | Yes |
Bushings Included | No |
Castle Nut Included | Yes |
Color | Gray |
Cotter Pin Hole | Yes |
Cotter Pin Included | Yes |
Dust Boot | Yes |
Dust Boot Material | Choloroprene Rubber (CR) |
Greasable | No |
Grease Fitting Included | No |
Height (IN) | 3.327 |
Height (MM) | 87.0 |
Material | Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040 |
Maximum Outside Diameter (IN) | 1.063 |
Maximum Outside Diameter (MM) | 27.0 |
Mount Plate Included | No |
Mounting Bolt Head Diameter (IN) | 1.047 |
Mounting Bolt Head Diameter (MM) | 26.6 |
Mounting Bolt Length (IN) | 0.787 |
Mounting Bolt Length (MM) | 20.0 |
Mounting Bolt Shank Diameter (MM) | 12.0 |
Mounting Bolt Thread Length (MM) | 18.0 |
Mounting Bolt Thread Pitch (MM) | 1.25 |
Mounting Bolts Included | Yes |
Mounting Hardware Included | Yes |
Mounting Hole Quantity | 3 |
Mounting Type | Bolt On |
Nuts Included | Yes |
Position(s) | Front Lower, Front. For the position specific to your vehicle, refer to the Application tab. |
Stud Taper Per Foot (IN) | 0.125 |
Stud Tapered End 1 Diameter (in) | 0.787 |
Stud Tapered End 1 Diameter (mm) | 20.0 |
Stud Tapered End 2 Diameter (in) | 0.685 |
Stud Tapered End 2 Diameter (mm) | 17.4 |
Stud Thread Diameter (MM) | 14.0 |
Stud Thread Length (IN) | 0.866 |
Stud Thread Pitch (mm) | 1.5 |
Stud Type | Threaded |
Suspension Grade Type | Standard |
Tapered Stud | Yes |
Washers Included | No |
Width (MM) | 112.0 |
Wrench Size (mm) | 16.0 |