Автозапчасти » FORD » 2001 » ESCAPE » 3.0L V6 » КПП / Редуктора / Привода » Карданный вал
Drive Shaft
Rear; 4WD; with 30.51" (775 mm) Long Driveshaft; Front Section of 2 Piece Driveshaft; Measurement taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Rear; 4WD; with 30.51" (775 mm) Long Driveshaft; Front Section of 2 Piece Driveshaft; Measurement taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Drive Shaft
Rear; Automatic trans.; Front Section Of 2 Piece Rear Driveshaft; OE Tube length of 22-1/4 in. From Weld To Weld; 1310 U/Joint On One End; 6 Bolt CV Head; Around 30.5" From Flange to Center of U/Joint; with 2 Piece Rear Driveshaft
Rear; Automatic trans.; Front Section Of 2 Piece Rear Driveshaft; OE Tube length of 22-1/4 in. From Weld To Weld; 1310 U/Joint On One End; 6 Bolt CV Head; Around 30.5" From Flange to Center of U/Joint; with 2 Piece Rear Driveshaft
Drive Shaft
Rear; 4WD; Automatic trans.; XLT Model; Nominal length is 73.125 in. long measured from face of flange to the center of the furthest U-Joint; with 2 Piece Rear Driveshaft
Rear; 4WD; Automatic trans.; XLT Model; Nominal length is 73.125 in. long measured from face of flange to the center of the furthest U-Joint; with 2 Piece Rear Driveshaft
