Автозапчасти » JEEP » 1995 » GRAND CHEROKEE » 4.0L L6 » КПП / Редуктора / Привода » Карданный вал

Drive Shaft
Front; 4WD; Measurement is taken from center of U-joint to the end of flange on the opposite side; with 249 Transfer Case; with Dana Model 30 Axle; with 32-1/4" (820 mm) Long Driveshaft; From 11/01/1995

Drive Shaft
Front; with 249 Transfer Case; with Dana Model 30 Axle; with 31.10" (790 mm) Long Driveshaft

Drive Shaft
Fits Front; 4WD; with 30.47" (774 mm) Long Driveshaft; with 231 Transfer Case; with Dana Model 30 Axleor Front; 4WD; with 30.47" (774 mm) Long Driveshaft; with 242 Transfer Case; with Dana Model 30 Axle

Drive Shaft
Rear; 4WD Driveshaft; Replaces OE Part Number(s) 52098164; 1 Piece Driveshaft

Drive Shaft
Front; Trans. code 42RE; Double U-joint at Transfer Case; Sales Code DHP (Select-Trac Full Time 4WD); To 11/01/95; U-Joint at Front Differential

Drive Shaft
Rear; 4WD

Drive Shaft
Rear; RWD; Trans. code 42RE

Drive Shaft
Front; 4WD; To 11/01/95

Drive Shaft
Front; 4WD; w/ 30-1/2" Prop Shaft; From 11/1/95

Drive Shaft
Front; 4WD; w/ 249 Transfer Case; From 11/1/95; w/ 31-1/2" Prop Shaft

Drive Shaft
Front; Overall compressed length is 31-1/4 in. long from flange to center of u/joint. 6 bolt CV at differential; 1310 double cardan CV joint at transfer case; Only One End of Driveshaft has a Flange; with Dana 30 Front Axle; with 249 Transfer Case

Drive Shaft
Front

Drive Shaft
Front; 4WD; Trans. code 42RE; w/Constant Velocity Joint

Drive Shaft
Front; Overall compressed length is 30-1/4 in. long from flange to center of u/joint. With 249 transfer case and Dana 30 front differential.; with 249 Transfer Case; with Dana 30 Front Axle; Only One End of Driveshaft has a Flange

Drive Shaft
Front; Overall compressed length is 30-1/2 in. long from cente of u/joint to center of u/joint; with Dana 30 Front Axle; with 231, 242 or 249 Transfer Cases