Автозапчасти » JEEP » 1998 » WRANGLER » 4.0L L6 » КПП / Редуктора / Привода » Карданный вал

CARDONE 659315
Drive Shaft
Front; Automatic trans.; with 38.07" (967 mm) Long Driveshaft
CARDONE 659316
Drive Shaft
Front; Manual trans.; with 39.45" (1002 mm) Long Driveshaft
DORMAN 936070
Drive Shaft
Rear; Manual trans.; w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))
DORMAN 936075
Drive Shaft
Rear; Manual trans.; w/Sales Code DRJ (Dana M35/194 mm Rear Axle)
DORMAN 936085
Drive Shaft
Rear; 2 to 6 In. Lift; Use Only w/Slip Yoke Eliminator Kit
SKP SK936108
Drive Shaft
Front; Automatic trans.; 3.220" Across Slip Yoke Bearing
USA STANDARD GEAR ZDS9315
Drive Shaft
Front; Automatic trans.; Compressed Length of 38 in. measured from center to center of the furthest U-Joints; 1310 U-Joint at the Differential, 1310 Double Cardan CV Joint at Transfer Case
USA STANDARD GEAR ZDS9316
Drive Shaft
Front; Manual trans.; Compressed Length of 39-1/2 in. measured from center to center of the furthest U-Joints; 1310 U-Joint at the Differential; 1310 Double Cardan CV Joint at Transfer Case
USA STANDARD GEAR ZDS9765
Drive Shaft
Front; Manual trans.; Overall compressed length is 38-1/4 in. long from center of u/joint to center of furthest u/joints; 1310 Front U-Joint (1.063 in. Cap Diameter); 1310 Double Cardan CV Joint at the transfer Case; With 231 or 242 transfer case; Dana 30 front differential.; with Dana 30 Front Axle; with 231 or 242 Transfer Cases
USA STANDARD GEAR ZDS9766
Drive Shaft
Front; Overall compressed length is 39-1/4 in. long from center of u/joint to center of furthest u/joints; 1310 Front U-Joint (1.063 in. Cap Diameter); 1310 Double Cardan CV Joint at the transfer Case; With 231 or 242 transfer case; Dana 30 front differential.
WJB / INMOTION PARTS WDS36075
Drive Shaft
Rear; Manual trans.; w/Sales Code DRJ (Dana M35/194 mm Rear Axle)

FitsRear; 175MM Rear Axle; Manual Transor Rear; Dana M235 Wide Rear Axle; Manual Trans
WJB WDS36075
Drive Shaft
Rear; Manual trans.; w/Sales Code DRJ (Dana M35/194 mm Rear Axle)